INDUSTRIAL ASSEMBLY PRODUCTS REFER PIRTEK FOR MSDS SHEETS. High Strength Gas Pipe Seal - Yellow PROTECT IAS77

Application
Sealing & Gasketing. Typical applications are in sealing of all types of threaded connections against water, oil, gases and most common materials conveyed by pipes.

Useful Hint
When cure speed is extended due to low temperatures or inactive surfaces, activator can be used. Best results are found if IAS77 is applied to 2nd or 3rd threadform. Excess can be wiped away, any migration into lines will not solidify and can be flushed away during commissioning.

Properties
Fast cure to fixture usually <15 mins. @ 20 degrees C. Typical Strength: 5 N/mm2. Sizes: 6mm up to 75mm (coarse). Increase of gap size or fit extends the cure time

Procedure for Application
Product is normally hand applied from the bottle. Ensure parts are clean, dry and free from oil and grease. Full cure 6-12 hours

Compatible Accelerators Primers
IA471 Activator can be used, but up to 30% strength reduction may be incurred

Tech Features
Resin: Dimethacrylate. Colour: Yellow. Cure Speed with Activator: <10 minutes. Cure Speed w/o Activator: <15 mins @ 20 degrees C. Viscosity: >50,000 cps. Gap Fill: 0.05mm to 0.4mm. Flash Point: >100 degrees C. Shelf Life: 12 months @ 20 degrees C. Specific Gravity: 1.09

Materials and Specifications
AGA Certificate 6900

Notes
Consult Pirtek for MSDS Sheets for all Industrial Assembly Products

Temperature Range
-50 degrees C to +150 degrees C